|
|
研究成果
|
 |
|
|
|
|
2024 |
|
230) |
S.S. Lin, S.J. Liu, E.C. Chan, K.Y.
Chong,Y.S. Chan, T.T. Tsai, C.C. Niu, L.J. Yuan, C.Y. Yang,
H.Y. Hsiao, Y.J. Hsueh, C.A. Chen, S.W.N. Ueng. Development
of a Biodegradable PLGA Carrier to Provide Wnt Agonists and
Antibiotics to Meet the Requirements for Patients with Bone
Infections. Pharmaceuticals, 17(8), 1038 (2024) (SCI) |
|
229) |
Y.P. Chen, T.S. Lo, Y.H. Chien, Y.H. Kuo, S.J. Liu*.
In vitro and in vivo drug release from a nano-hydroxyapatite reinforced resorbable nanofibrous scaffold for treating female pelvic organ prolapse.
Polymers, 16, 1667 (2024) (SCI) (指導作者) |
|
228) |
K.H. Cheng, T.L. Hsieh, S.J. Liu*, C.J.
Chiang, J.C. Chen*. Synthesis and characterization of indeno-fused
naphthopyrans containing methacryloyl and urethane groups
for photochromic contact lenses applications. European
Polymer Journal, 211, 113044 (2024) (SCI) (指導作者) |
|
227) |
Y.C. Chou, Y.H. Hsu, D. Lee, J.W.
Yang, Y.H. Yu, S.J. Liu*. Novel bioresorbable drug-eluting
mesh scaffold for therapy of muscle injury. ACS Biomaterials
Science and Engineering, 10, 2595−2606 (2024) (SCI) (指導作者) |
|
226) |
S.J. Shen, P.C. Feng, R.C. Wu, Y.H.
Kuo, S.J. Liu*. Resorbable nanofibrous membranes for local
and sustained co-delivery of acyclovir and ketorolac in
herpes therapy. International Journal of Pharmaceutics, 654,
123988 (2024) (SCI) (指導作者) |
|
225) |
Y.H. Hsu, Y.C. Chou, C.L. Chen, Y.H.
Yu, C.J. Lu, S.J. Liu*. Development of novel hybrid
3D-printed degradable artificial joints incorporating
electrospun pharmaceutical- and growth factor-loaded
nanofibers for small joint reconstruction. Biomaterials
Advances, 159, 213821 (2024) (SCI) (指導作者) |
|
2023 |
|
224) |
Y.H. Yu, C.H. Lee, Y.H. Hsu, Y.C. Chou, B.K. Hong, C.T.
Huang, S.J. Liu*. Novel CO2-encapsulated Pluronic F127
hydrogel for the treatment of Achilles tendon injury.
Scientific Reports, 13, 21895 (2023) (指導作者) |
|
223) |
Y.H. Yu, C.H. Lee, Y.H. Hsu, Y.C. Chou, P.C. Yu, C.T. Huang,
S.J. Liu*. Anti-adhesive resorbable indomethacin/bupivacaine-eluting
nanofibers for tendon rupture repair: in vitro and in vivo
studies. International Journal of Molecular Sciences, 24,
16235 (2023) (SCI) (指導作者) |
|
222) |
S.S. Lin, S.W.N. Ueng, K.Y. Chong, Y.S. Chan, T.T. Tsai, L.J.
Yuan, S.J. Liu, C.Y. Yang, H.Y. Hsiao, Y.J. Hsueh, C.A.
Chen, C.C. Niu. Effects of Hyperbaric Oxygen Intervention on
the Degenerated Intervertebral Disc: From Molecular
Mechanisms to Animal Models. Cells, 12, 2111 (2023) (SCI) |
|
221) |
S.Y. Chen, F.Y. Lee, R.C. Wu, C.E. Chao, C.J. Lu, S.J. Liu*.
Hybrid Resorbable 3D-printed Mesh/electrospun Nanofibrous
Drug/biomolecule-eluting Mats for Alveolar Ridge
Preservation. Polymers, 13, 3445 (2023) (SCI) (指導作者) |
|
220) |
C. Wang, S.J. Liu, C.H. Chang. Thickness of simple calcaneal
tuberosity avulsion fractures influences the optimal
fixation method employed. Bone Joint Research, 12(8),
504–511 (2023) (SCI) |
|
219) |
Y.H. Yu, C.H. Lee, Y.H. Hsu, Y.C. Chou, P.C. Yu, S.J. Liu*.
Electrospun Nanofibrous Composite Membranes for Long-Term
Release of Celecoxib for Achilles Tendon Reconstruction
Following Injury. Macromolecular Materials and Engineering, 2023,
2300149 (2023) (SCI) (指導作者) |
|
218) |
Y.C. Chou, Y.H. Hsu, D. Lee, J. Ho, Y.H. Yu, S.J. Liu*.
Novel additively manufactured tubular scaffold combined with
electrospun biomolecules-embedded nanofibers promotes
healing of ruptured tendon. Materials & Design, 230,
111953 (2023) (SCI) (指導作者) |
|
217) |
C.H. Lee, D.Y. Chen, M.J. Hsieh, K.C. Hung, S.C. Huang, C.J.
Cho, S.J. Liu*. Nanofibrous Insulin/Vildagliptin Core-shell
PLGA Scaffold Promotes Diabetic Wound Healing. Frontiers in
Bioengineering and Biotechnology, 11,
1075720 (2023) (SCI) (指導作者) |
|
216) |
Y.H. Hsu, Y.H. Yu, Y.C. Chou, C.J. Lu, Y.T. Lin, S.W.N. Ueng, S.J.
Liu*. Sustained Release of Antifungal and Antibacterial
Agents from Novel Hybrid Degradable Nanofibers for the
Treatment of Polymicrobial Osteomyelitis. International
Journal of Molecular Sciences, 24, 3254 (2023) (SCI) (指導作者) |
|
2022 |
|
215) |
C.H. Lee, C.H. Huang, K.C. Hung, S.C. Huang, C.C. Kuo, S.J.
Liu*. Nanofibrous Vildagliptin/PLGA Membranes Accelerate
Diabetic Wound Healing by Angiogenesis. Pharmaceuticals, 15,
1358 (2022) (SCI) (指導作者) |
|
214) |
C.H. Lee, S.C. Huang, K.C. Hung, C.J. Chao, S.J. Liu*.
Enhanced Diabetic Wound Healing Using Electrospun
Biocompatible PLGA-Based Saxagliptin Fibrous Membranes. Nanomaterials, 12,
3740 (2022) (SCI) (指導作者) |
|
213) |
D. Lee, Y.K. Lin, S.C. Hsu, Y.L. Tang, S.J. Liu*. Factors
determining the flow erosion/part deformation of film insert
molded thermoplastic products. International Polymer
Processing, 37(4), 442–451 (2022) (SCI) (指導作者) |
|
212) |
Y.H. Yu, S.J. Shen, Y.H. Hsu, Y.C. Chou, P.C. Yu, S.J.
Liu*. Tri-layered doxycycline, collagen and bupivacaine
loaded poly(lactic-co-glycolic acid) nanofibrous
scaffolds for tendon rupture repair. Polymers, 14, 2659
(2022) (SCI) (指導作者)
|
|
211) |
C.H. Lee, M.J. Hsieh, J. Roth, X. Fu, C.H. Lu, K.C.
Hung, C.C. Kuo, S.J. Liu*. Hybrid core-shell nanofibrous
scaffolds/stent delivery angiotensin II receptor blocker
to treat diabetic artery disease. ACS Applied Polymer
Materials, 4, 4199-4207
(2022) (SCI) (指導作者)
|
|
210) |
Y.H. Hsu, Y.H. Yu, D. Lee, Y.C. Chou, C.K. Wu, C.J. Lu, S.J.
Liu*. Pharmaceutical-eluting hybrid degradable hydrogel/microparticle
loaded sacs for finger joint interpositional arthroplasty.
Biomaterials Advances, 137, 212846
(2022) (SCI) (指導作者) |
|
209) |
C.J. Weng, Y.C. Wu, M.Y. Hsu, F.P. Chang, S.J. Liu*.
Electrospun, resorbable, drug-eluting, nanofibrous membranes
promote healing of allograft tendons. Membranes, 12, 529
(2022) (SCI) (指導作者) |
|
208) |
C.J. Weng, C.T. Liao, M.Y. Hsu, F.P. Chang, S.J. Liu*.
Simvastatin-loaded nanofibrous membrane efficiency on the
repair of Achilles tendons. International Journal of
Nanomedicine, 17, 1171-1184
(2022) (SCI) (指導作者) |
|
207) |
K.S. Liu, W.H. Chen, C.H. Lee, Y.F. Su, Y.W. Liu, S.J.
Liu*. Novel Biodegradable 3D-printed Analgesics-eluting-nanofibers
Incorporated Nuss Bars for Therapy of Pectus Excaratum. International
Journal of Molecular Sciences, 23, 2265 (2022) (SCI) (指導作者) |
|
206) |
S.J. Shen, Y.C. Chou, S.C. Hsu, Y.T. Lin, C.J. Lu, S.J.
Liu*. Fabrication of ropivacaine/dexamethasone-eluting
microparticles via electrospraying technique for
postoperational pain control. Polymers, 14, 702 (2022) (SCI)
(指導作者) |
|
205) |
P.Y. Chou, D. Lee, C.C. Weng, R.C. Wu,
C.T. Liao, S.J. Liu*. Bone Morphogenetic Protein-,
Antimicrobial Agent-, and Analgesic-Incorporated Nanofibrous
Scaffolds for the Therapy of Alveolar
Clefts. Pharmaceutics, 14, 374 (2022) (SCI)(指導作者) |
|
204) |
P.Y. Chou, D. Lee, S.H. Chen, C.T.
Liao, L.J. Lo, S.J. Liu*. 3D-printed/electrospun
bioresorbable nanofibrous drug-eluting cuboid frames for
repair of alveolar bone defects. International Journal of
Pharmaceutics, 15, 121497
(2022) (SCI) (指導作者) |
|
2021 |
|
203) |
C.H. Lee, K.S. Liu, J.G. Roth, K.C. Hung, Y.W. Liu, S.H.
Wang, C.C. Kuo, S.J. Liu*. Telmisartan Loaded Nanofibers
Enhance Re-Endothelialization and Inhibit Neointimal
Hyperplasia. Pharmaceutics, 13, 1756 (2021) (SCI) (指導作者) |
|
202) |
S. Morelli, S.J. Liu, L. De Bartolo. Membrane Systems
for Tissue Engineering 2020. Membranes, 11, 763
(2021) (SCI)
|
|
201) |
Y.H. Yu, Y.T. Lin, Y.H. Hsu, Y.C. Chou, S.W.N. Ueng, S.J.
Liu*. Biodegradable Antimicrobial Agent/Analgesic/Bone
Morphogenetic Protein-Loaded Nanofibrous Fixators for Bone
Fracture Repair. International Journal of Nanomedicine, 16,
5357-5370 (2021) (SCI) (指導作者) |
|
200) |
Y.P. Chen, T.S. Lo, Y.T. Lin, Y.H. Chien, C.J. Lu, S.J.
Liu*. Fabrication of Drug-Eluting Polycaprolac-tone/Poly(Lactic-co-Glycolic
Acid) Prolapse Mats Using Solution-Extrusion 3D Printing and
Coaxial Electrospinning Techniques. Polymers, 13, 2295
(2021) (SCI) (指導作者) |
|
199) |
Y.Y. Tseng, T.Y. Chen, S.J. Liu*. Role of polymeric
local drug delivery in multimodal treatment of malignant
glioma: A review. International Journal of Nanomedicine, 16,
4597–4614 (2021) (SCI) (指導作者)
|
|
198) |
M.Y. Hsu, C.H. Hsieh, Y.T. Huang, S.Y. Chu, C.M. Chen, W.J.
Lee, S.J. Liu*. Enhanced paclitaxel efficacy to suppress
triple-negative breast cancer progression using metronomic
chemotherapy with a controlled release system of electrospun
poly-D-L-lactide-co-glycolide (PLGA) nanofibers. Cancers, 13,
3350 (2021) (SCI) (指導作者) |
|
197) |
K.S. Liu, C.W. Kao, Y.Y. Tseng, S.K. Chen, Y.T. Lin, C.J.
Lu, S.J. Liu*. Assessment of antimicrobial agents,
analgesics, and epidermal growth factors-embedded
anti-adhesive poly(lactic-co-glycolic acid) nanofibrous
membranes: In vitro and in vivo studies. International
Journal of Nanomedicine, 16, 4471-4480
(2021) (SCI) (指導作者) |
|
196) |
Y. Srithep, T. Akkaprasa, D. Pholharn, J. Morris, S.J. Liu,
P. Patrojanasophon, T. Ngawhirunpat. Metronidazole-loaded
polylactide stereocomplex electrospun nanofibers mats for
treatment of periodontal disease. Journal of Drug Delivery
Science and Technology, 64, 102582 (2021) (SCI) |
|
195) |
Y.H. Yu, S.J. Liu*. Polyetheretherketone for orthopedic
applications: A review. Current Opinion in Chemical
Engineering, 1, 100687
(2021) (SCI) (指導作者) |
|
194) |
T.C. Yang, S.J. Liu, W.L. Lo, S.M. Chen, Y.L. Tang, Y.Y.
Tseng. Enhanced anti-tumor activity in mice with
temozolomide-resistant human glioblastoma cell line-derived
xenograft using SN-38-incorporated polymeric microparticle.
International Journal of Molecular Sciences, 22, 5557 (2021)
(SCI) |
|
193) |
T.Y. Yu, J.W.S. Pang, L.P. Lin, J.W. Cheng, S.J. Liu, W.C.
Tsai. Platelet-rich plasma releasate promotes early healing
in tendon after acute injury. The Orthopaedic Journal of
Sports Medicine, 9(4), 2325967121990377 (2021) (SCI) |
|
192) |
D. Lee, M.Y. Hsu, Y.L. Tang, S.J. Liu*. Manufacture of
binary nanofeatured polymeric films using nanosphere
lithography and ultraviolet roller
imprinting. Materials, 14, 1669 (2021) (SCI) (指導作者) |
|
191) |
C.J. Weng, Y.C. Wu, S.J. Liu*. Manufacture of unitary/binary
ordered arrays employing self-assembled nanocolloid
lithography. Japanese
Journal of Applied Physics, 60, 036502
(2021) (SCI)
(指導作者) |
|
190) |
D. Lee, Y.L. Tang, S.J. Liu*. Fast Fabrication of
Nanostructured Films Using Nanocolloid Lithography and UV
Soft Mold Roller Embossing: Effects of Processing
Parameters. Polymers, 13, 405 (2021)(SCI) (指導作者) |
|
189) |
P.Y. Chou, Y.C. Chou, Y.H. Lai, Y.T. Lin, C.J. Lu, S.J. Liu,
Fabrication of Drug-Eluting Nano-Hydroxylapatite Filled
Polycaprolactone Nanocomposites Using Solution-Extrusion 3D
Printing Technique. Polymers, 13, 318 (2021) (SCI) (指導作者) |
|
188) |
S.J. Shen, D. Lee, Y.C. Wu, S.J. Liu*.Binary self-assembly
of nanocolloidal arrays using concurrent and sequential
spin-coating techniques. Materials, 14, 274 (2021) (SCI) (指導作者) |
|
2020 |
|
187) |
C.H. Lee, K.S. Liu, C.W. Cheng, E.C.
Chan, K.C. Hung, M.J. Hsieh, S.H. Chang, X. Fu, J.H. Juang,
I.C. Hsieh, M.S. Wen, S.J. Liu*. Co-delivery of sustainable
anti-microbial agents and platelet-derived growth factor via
biodegradable nanofibers for repair of diabetic infectious
wounds. ACS Infectious Diseases, 6, 2688-2697
(2020) (SCI) (指導作者) |
|
186) |
Y.Y. Tseng, T.C. Yang, S.M. Chen, S.T. Yang, Y.L. Tang, S.J.
Liu*. Injectable SN-38-embedded polymeric microparticles
promote antitumor efficacy against malignant glioma in an
animal model. Pharmaceutics, 12, 479 (2020) (SCI) (指導作者) |
|
185) |
J.M. Chen, D. Lee, J.W. Yang, S.H. Lin, Y.T. Lin, S.J. Liu*.
Solution-extrusion additive manufacturing of biodegradable
polycaprolactone. Applied Sciences, 10, 3189 (1-14)
(2020) (SCI) (指導作者) |
|
184) |
M.Y. Hsu, Y.T. Huang, C.J. Weng, C.M. Chen, Y.F. Su, S.Y.
Chu, J.H. Tseng, R.C. Wu, S.J. Liu*. Preparation and in
vitro/in vivo evaluation of doxorubicin-loaded
poly[lactic-co-glycol acid] microspheres using electrospray
method for sustained drug delivery and potential
intratumoral injection. Colloids and Surfaces B:
Biointerfaces, 190, 110937
(2020) (SCI) (指導作者) |
|
183) |
Y.H. Yu, D. Lee, Y.H. Hsu, Y.C. Chou, S.W.N. Ueng, C.K.
Chen, S.J. Liu*. A three-dimensional printed
polycaprolactone scaffold combined with co-axially
electrospun vancomycin/ceftazidime/bone morphological
protein-2 sheath-core nanofibers for the repair of segmental
bone defects during the Masquelet procedure. International
Journal of Nanomedicine, 15, 913–925 (2020) (SCI) (指導作者) |
|
182) |
J.M. Chen, K.C. Liu, W.L. Yeh, J.C. Chen, S.J. Liu*.
Sustained Release of Levobupivacaine, Lidocaine and
Acemetacin from Electrosprayed Microparticles: In vitro and
in vivo studies. International Journal of Molecular
Sciences, 21,
1093 (1-15) (2020) (SCI) (指導作者) |
|
181) |
Y.Y. Tseng, C.K. Kao, K.S. Liu, Y.L. Tang, Y.W. Liu, S.J.
Liu*. Treating Intracranial Abscesses in Rats with
Stereotactic Injection of Biodegradable Vancomycin-Embedded
Microparticles. Pharmaceutics, 12, 91 (2020) (SCI) (指導作者) |
|
180) |
J.M. Chen, Y.Y. Tseng, D. Lee, Y.T. Lin, S.H. Lin, T.Y.
Lee, S.J. Liu*, H. Ito. A robust experimental model to
explore the three-dimensional printing of polylactide parts:
solution vs. melt extrusion. Applied Sciences, 10, 509
(1-16) (2020) (SCI) (指導作者) |
|
179) |
C.J. Weng, D. Lee, J. Ho, S.J. Liu*.
Doxycycline-embedded nanofibrous membranes help promote
healing of tendon rupture. International Journal of
Nanomedicine, 15, 125-136
(2020) (SCI) (指導作者) |
|
178) |
C.H. Lee, K.C. Hung, M.J. Hsieh, S.H.
Chang, J.H. Juang, I.C. Hsieh, M.S. Wen, S.J. Liu*.
Core-shell insulin-loaded nanofibrous scaffolds for
repairing diabetic wounds. Nanomedicine: Nanotechnology,
Biology, and Medicine 24,
102123 (2020) (SCI) (指導作者) |
|
2019 |
|
177) |
Y.H. Hsu, H.Y. Chen, J.C. Chen, Y.H. Yu, Y.C. Chou, S.W.N.
Ueng*, S.J. Liu*. Resorbable beads provide extended release
of antifungal medication: In vitro and in vivo
analyses. Pharmaceutics, 11, 550 (2019) (SCI) (指導作者) |
|
176) |
S.J. Liu, S.T. Yang, S.M. Chen, Y.C. Huang, W.H. Lee, J. Ho,
Y.C. Chen, Y.Y. Tseng. Novel multi-drugs incorporated
hybrid-structured nanofibers enhance alkylating agents
activity in malignant gliomas. Therapeutic Advances in
Medical Oncology, 11, 1-17 (2019) |
|
175) |
C.H. Lee, M.J. Hsieh, S.H. Chang, K.C.
Hung, C.J. Wang, M.Y. Hsu, J.H. Juang, I.C. Hsien, M.S.
Wen, S.J. Liu*, Nanofibrous vildagliptin-eluting stents
enhancere-endothelialization and reduce neointimal formation
in diabetes: in vitro and in vivo International Journal of
Nanomedicine, 14, 7503–7513 (2019) (SCI) (指導作者) |
|
174) |
C.W. Kao, Y.Y. Tseng, K.S. Liu, J.C. Chen, H.L. He, Y.C.
Kau, S.J. Liu*, Anesthetics and human epidermal growth
factor incorporated into anti-adhesive nanofibers provide
sustained pain relief and promote healing of surgical
wounds, International Journal of Nanomedicine, 14, 4007–4016
(2019) (SCI) (指導作者) |
|
173) |
M.Y. Hsu, C.H. Feng, Y.W. Liu, S.J. Liu*, An orthogonal
model to study the effect of electrospraying parameters on
the morphology of poly (D,L)-lactide-co-glycolide (PLGA)
particles, Applied Sciences, 9, 1077 (2019) (SCI) (指導作者) |
|
172) |
Y.P. Chen, H.Y. Liu, Y.W. Liu, T.Y. Lee, S.J. Liu*,
Determination of Electrospinning Parameters’ Strength in
Poly(D,L)-lactide-co-glycolide Micro/Nanofibers Diameter
Tailoring, Journal
of Nanomaterials, 2019, 2626085-8 (2019) (SCI) (指導作者) |
|
171) |
Y.P. Chen, Y.W. Liu, D. Lee, J.T. Qiu, T.Y. Lee, S.J. Liu*,
Biodegradable Andrographolide-eluting Nanofibrous Membranes
for the Treatment of Cervical Cancer, International Journal
of Nanomedicine,14, 421–429 (2019) (SCI) (指導作者) |
|
2018 |
|
170) |
S.J. Liu, T.C. Yang, S.T. Yang, Y.C. Chen, Y.Y. Tseng,
Biodegradable hybrid-structured nanofibrous membrane
supported chemoprotective gene therapy enhances chemotherapy
tolerance and efficacy in malignant glioma rats, Artificial
Cells, Nanomedicine and Biotechnology, 46, S515-S526
(2018) (SCI) |
|
169) |
K.S. Liu, W.H. Chen, C.H. Lee, Y.F. Su, S.J. Liu*, Extended
Pain Relief Achieved by Analgesic-eluting Biodegradable
Nanofibers in the Nuss Procedure: In Vitro and In Vivo
Studies, International Journal of Nanomedicine, 13,
8355–8364 (2018) (SCI) (指導作者) |
|
168) |
Y.H. Yu, R.C. Wu, D. Lee, C.K. Chen, S.J. Liu*, Artificial
membrane induced by novel biodegradable nanofibers in the
Masquelet procedure for treatment of segmental bone
defects, Journal of Nanomaterials, 2018,
8246571-8 (2018) (SCI) (指導作者) |
|
167) |
C.H. Lee, M.J. Hsieh, S.H. Chang, S.J. Liu*, C.J. Wang, K.C.
Hung, Y.H. Yeh, W.J. Chen, I.C. Hsieh, M.S. Wen, Promoting
vascular healing using nanofibrous ticagrelor-eluting
stents, International
Journal of Nanomedicine, 13, 6039-6048
(2018) (SCI) (指導作者) |
|
166) |
D. Lee, M.Y. Hsu, M.J. Li, Y.W.
Liu, S.J. Liu*, C.Y. Liu, H. Ito, Factors affecting the
co-axial electrospraying of core–shell-structured
poly(d,l-lactide-co-glycolide) microparticles, Japanese
Journal of Applied Physics, 57,
116702 (2018) (SCI)
(指導作者) |
|
165) |
Y.H. Hsu, D.W. Chen, M.J. Li, Y.H. Yu, Y.C. Chou, S.J. Liu*,
Sustained Delivery of Analgesic and Antimicrobial Agents to
Knee Joint by Direct Injections of Electrosprayed
Multipharmaceutical-Loaded Nano/Microparticles. Polymers 10,
890-16 (2018) (SCI) (指導作者) |
|
164) |
C.H. Lee, M.J. Hsieh, S.C. Liu, J.K. Chen, S.J. Liu*, I.C.
Hsieh, M.S. Wen, K.C. Hung, Novel Bifurcation Stents Coated
with Bioabsorbable Nanofibers with Extended and Controlled
Release of Rosuvastatin and Paclitaxel, Materials Science &
Engineering C, 88, 61-69 (2018) (SCI) (指導作者) |
|
163) |
S.H. Chang, C.H. Lee, Y.H. Ush, S.J. Liu, C.J. Wang, M.Y.
Hsu, W.J. Chen, Propylthiouracil-coated biodegradable
polymer inhibited neointimal formation and enhanced
re-endothelialization after vascular injury, International
Journal of Nanomedicine, 13 1761–1771 (2018) (SCI) |
|
162) |
Y.C. Lin, K.S. Liu, D. Lee, M.J. Li, S.J. Liu*, H. Ito, In
Vivo and In Vitro Elution of Analgesics from Multilayered
Poly(D,L)-lactide-co-glycolide Nanofibers Incorporated
Ureteral Stents, Journal of Nanomaterials, 2018, 4943210-7
(2018) (SCI) (指導作者) |
|
2017 |
|
161) |
F.Y. Lee, D. Lee, T.C. Lee, J.K. Chen, R.C. Wu, K.C. Liu,
S.J. Liu*, Fabrication of Multi-Layered Lidocaine and
Epinephrine-Eluting PLGA/Collagen Nanofibers: In Vitro and
In Vivo Study, Polymers, 9, 416 (2017) (SCI) (指導作者) |
|
160) |
C.W.
Kao, D. Lee, M.H. Wu, J.K. Chen, H.L. He, S.J. Liu*,
Lidocaine/Ketorolac Loaded Biodegradable Nanofibrous
Anti-adhesive Membranes that Offer Sustained Pain Relief for
Surgical Wounds, International Journal of Nanomedicine, 12,
5893-5901 (2017) (SCI) (指導作者) |
|
159) |
Y.C. Chou, D. Lee, T.M. Chang, Y.H. Hsu, Y.H. Yu, E.C.
Chan, S.J. Liu*, Combination of a
Biodegradable three-dimensional (3D) -Printed Cage for
Mechanical Support and Nanofibrous Membranes for Sustainable
Release of Antimicrobial Agents for Treating
the Femoral Metaphyseal Comminuted Fracture, Journal of the
Mechanical Behavior of Biomedical Materials, 72,
209-218 (2017) (SCI) (指導作者) |
|
158) |
C.H. Lee, M.J. Hsieh, S.H. Chang, C.L.
Chiang, C.L. Fan, S.J. Liu*, W.J. Chen, C.J. Wang, M.Y. Hsu,
K.C. Hung, C.C. Chou, P.C. Chang, Biodegradable Cable-Tie
Rapamycin-eluting Stents, Scientific Report, 7, 111 (1-12)
(2017) (SCI) (指導作者) |
|
157) |
Y.Y. Tseng, T.C. Yang, Y.C. Wang, W.H. Lee, T.M. Chang, Y.C.
Kau, S.J. Liu*, Targeted concurrent and sequential delivery
of chemotherapeutic and antiangiogenic agents to the brain
by using drug-loaded nanofibrous membranes, International
Journal of Nanomedicine, 12, 1265-1276 (2017) (SCI) (指導作者) |
|
2016 |
|
156) |
Y.Y. Tseng, C.H. Su, S.T. Yang, Y.C. Huang, W.H. Lee,.Y.C.
Wang, S.C. Liu, S.J. Liu*, Advanced interstitial
chemotherapy combined with targeted treatment of malignant
glioma in rats by using drug-loaded nanofibrous
membranes, Oncotarget, 7(37), 59902-59916 (2016) (SCI)
(指導作者) |
|
155) |
I.E.. Tseng, Y.C. Kau, S.J.
Liu*, Advanced
Interstitial Chemotherapy for Treating Malignant Glioma, Expert
Opinion on Drug Delivery, 13(11):1533-1544 (2016) (SCI)
(指導作者)
|
|
154) |
D. Lee, C.W. Kao, T.W.
Huang, J.H. You, S.J. Liu*, Electrospinning of sheath-core
structured chitosan/polylactide nanofibers for the removal
of metal ions, International
Polymer Processing, 31, 533-540 (2016) (SCI) (指導作者) |
|
153) |
Y.C. Chou, W.L. Yeh, C.L.
Chao, Y.H. Hsu, Y.H. Yu, J.K. Chen, S.J. Liu*, Enhancement
of tendon-bone healing via the combination of biodegradable
collagen-loaded nanofibrous membranes and a 3-dimensional
printed bone-anchoring bolt, International Journal of
Nanomedicine, 11,
4173-4186 (2016) (SCI) (指導作者) |
|
152) |
Y.H. Hsu, C.T. Lin, Y.H. Yu,
Y.C. Chou, S.J. Liu*, E.C. Chan, Dual delivery of active
anti-bactericidal agents and bonemorphogenetic protein at
sustainable high concentrations using biodegradable
sheath-core-structured drug-eluting
nanofibers, International Journal of
Nanomedicine, 11, 3927–3937 (2016) (SCI) (指導作者) |
|
151) |
Y.Y. Tseng, Y.C. Huang, T.C.
Yang, S.T. Yang, S.C. Liu, T.M. Chang, Y.C.
Kau, S.J. Liu*, Concurrent Chemotherapy of Malignant Glioma
in Rats by Using Multidrug-Loaded Biodegradable Nanofibrous
Membranes, Scientific Report, 6, 30630 (2016) (SCI) (指導作者) |
|
150) |
Y.H. Yu, Y.H. Hsu, Y.C.
Chou, C.L. Fan, S.W.N. Ueng, Y.C. Kau, S.J. Liu*, Sustained
Relief of Pain from Osteosynthesis Surgery of Rib Fracture
by Using Biodegradable Lidocaine-eluting Nanofibrous
Membranes, Nanomedicine:
Nanotechnology, Biology and Medicine, 12,
1785-1793 (2016) (SCI) (指導作者) |
|
149) |
S.W.N. Ueng, S.S. Lin, I.C.
Wang, C.Y. Yang, R.C. Cheng, S.J. Liu, E.C. Chan, C.F. Lai,
L.J. Yuan, S.C. Chan, Efficacy of vancomycin-releasing
biodegradable poly(lactide-co-glycolide) antibiotics beads
for treatment of experimental bone infection due to
Staphylococcus aureus, Journal of Orthopaedic Surgery and
Research, 11, 52 (1-9) (2016) (SCI) |
|
148) |
Y.C. Chou, D. Lee, T.M.
Chang, Y.H. Hsu, Y.H. Yu, S.J. Liu*, S.W.N.
Ueng, Development of a Three-Dimensional (3D) Printed
Biodegradable Cage to Convert Morselized Corticocancellous
Bone Chips into a Structured Cortical Bone
Graft, International Journal of Molecular Science, 17,
595 (1-14) (2016) (SCI) (指導作者) |
|
147) |
Y.C. Chou, Y.S. Cheng,
Y.H. Hsu, Y.H. Yu, S.J. Liu*, A Bio-artificial
Poly([d,l]-lactide-co-glycolide) Drug-eluting Nanofibrous
Periosteum for Segmental Long Bone Open Fractures with
Significant Periosteal Stripping Injuries: In Vitro and In
Vivo Studies, International
Journal of Nanomedicine, 11, 941-953
(2016) (SCI) (指導作者) |
|
146) |
Y.C. Chou, Y.S. Cheng, Y.H.
Hsu, Y.H. Yu, S.J. Liu*, Biodegradable
Nanofiber-Membrane for Sustainable Release of Lidocaine at
the Femoral Fracture Site as a Periosteal Block: In Vitro
and In Vivo Studies in a Rabbit Model, Colloids
and Surfaces B: Biointerfaces, 140, 332-341
(2016) (SCI) (指導作者) |
|
145) |
C.H. Lee, Y.K. Chao, S.H.
Chang, W.J. Chen, K.C. Hung, S.J. Liu*,
J.H. Juang, Y.T. Chen, F.S. Wang,Nanofibrous rhPDGF-eluting
PLGA-collagen hybrid Scaffolds Enhance Healing of Diabetic
Wounds, RSC
Advances, 6, 6276-6284 (2016) (SCI) (指導作者) |
|
2015 |
|
144) |
C.H. Lee, K.S. Liu, S.H.
Chang, W.J. Chen, K.C. Hung, S.J. Liu*, J.H.S. Pang, J.H.
Juang, Y.T. Chen, Fu-Shing Wang, Promoting Diabetic Wound
Therapy Using Biodegradable rhPDGF-loaded Nanofibrous
Membranes,
Medicine, 94(47), e1873(1-8) (2015) (SCI) (指導作者) |
|
143) |
Y.H. Yu, C.L. Fan, Y.H.
Hsu, Y.C. Chou, S.W.N. Ueng, S.J. Liu*, A Novel
Biodegradable Polycaprolactone Fixator for Osteosynthesis
Surgery of Rib Fracture: In vitro and in vivo study, Materials, 8,
7714-7722 (2015)(SCI) (指導作者) |
|
142) |
K.S. Liu, C.H. Lee, F.C.
Tsai, G.H. Jhong, S.J. Liu*, Computational analysis of the
mechanical behaviors of hemiarch and total arch
replacements, Annals of Biomedical Engineering, 43, 2881-2891
(2015) (SCI) (指導作者) |
|
141) |
Y.Y. Tseng, Y.C. Wang, C.H.
Su, T.C. Yang, T.M. Chang, Y.C. Kau, S.J. Liu*, Concurrent
and Sustained Delivery of Carmustine, Irinotecan, and
Cisplatin to the Cerebral Cavity Using Biodegradable
Nanofibers: In vitro and In vivo Studies, Colloids
and Surfaces B: Biointerfaces, 134, 254-261
(2015) (SCI) (指導作者) |
|
140) |
C.C. Niu, S.S. Lin, W.J.
Chen, S.J. Liu, L.H. Chen, C.Y. Yang, C.J. Wang, L.J. Yuan,
P.H. Chen, H.Y. Cheng, Benefits of biphasic calcium
phosphate hybrid scaffold-driven osteogenic differentiation
of mesenchymal stem cells through upregulated leptin
receptor expression, Journal of Orthopaedic Surgery and
Research, 10:111 (2015) (SCI) |
|
139) |
D.W.C. Chen, S.J. Liu*,
Nanofibers used for delivery of anti-microbial
agents, Nanomedicines, 10, 1959-1971
(2015)(SCI) (指導作者) |
|
138) |
Y.Y. Tseng, S.J. Liu*,
Nanofibers used for the delivery of
analgesics, Nanomedicines,10 ,1785-1800
(2015)(SCI) (指導作者) |
|
137) |
Y.K. Chao, C.H. Lee, K.S.
Liu, Y.C. Wang, C.W. Wang, S.J. Liu*, Sustained release of
bactericidal concentrations of penicillin in the pleural
space via an antibiotic-eluting pigtail catheter coated with
electrospun nanofibers: results from in
vivo and in vitro studies,International
Journal of Nanomedicine, 10, 3329-3336 (2015) (SCI) (指導作者) |
|
136) |
Y.K. Chao, Y.W. Wen, K.S.
Liu, Y.C. Wang, C.W. Wang, S.J. Liu*, Biodegradable
drug-eluting pellets provide steady and sustainable
cisplatin release in the intrapleural cavity: In vivo and in
vitro studies, International
Journal of Pharmaceuticals, 484, 38-43 (2015) (SCI)(指導作者) |
|
135) |
K.S. Liu, C.H. Lee, Y.C.
Wang, S.J. Liu*, Sustained Release of Vancomycin from Novel
Biodegradable Nanofiber-Loaded Vascular Prosthetic Grafts:
In vitro and in vivo study
International
Journal of Nanomedicine, 10, 885-891 (2015) (SCI) (指導作者) |
|
134) |
D. Lee, D.W.C. Chen, S.F.
Chiu, S.J. Liu*, Electrospun nanofibrous
polylactide/chitosan mats for the filtration of silver
ions, Textile
Research Journal, 85, 346-355
(2015)(SCI) (指導作者) |
|
133) |
Y.Y. Tseng, Y.C. Wang, C.H.
Su, S.J. Liu*, Biodegradable Vancomycin-eluting
Poly[(d,l)-lactide-co-glycolide] Nanofibers
for the Treatment of Postoperative Central Nervous System
Infection, Scientific
Report, 5, 7849 (2015)(SCI) (指導作者) |
|
132) |
C.H. Lee, S.H. Chang, K.C.
Hung, Y.H. Lin, S.J. Liu*, T.Y. Lin, M.J. Hsieh, J.H.S.
Pang, J.H. Juang, Augmentation of Diabetic Wound Healing and
Enhancement of Collagen Content using Nanofibrous
Glucophage-loaded Collagen/PLGA Scaffold Membranes, Journal
of Colloid and Interface Science, 439, 88-97
(2015)(SCI) (指導作者) |
|
|
|
2014 |
|
131) |
Y.C. Kau, C.C. Liao, Y.C.
Chen, S.J. Liu*, Sustained Release of Lidocaine from
Solvent-free Biodegradable Poly[(d,l)-lactide-co-glycolide]
(PLGA): In vitro and in vivo study, Materials, 7, 6660-6676
(2014) (SCI) (指導作者) |
|
130) |
C.H. Lee, C.Y. Yu, S.H.
Chang, K.C. Hung, S.J. Liu*, C.J. Wang, M.Y. Hsu, I.C.
Hsieh, W.J. Chen, Y.S. Ko, M.S. Wen, Promoting Endothelial
Recovery and Reducing Neointimal Hyperplasia Using
Sequential-like Release of Acetylsalicylic Acid and
Paclitaxel-loaded Biodegradable Stents, International
Journal of Nanomedicine, 9, 4117-4133 (2014) (SCI) (指導作者) |
|
129) |
Y.H. Hsu, D.W.C. Chen, C.D.
Tai, S.J. Liu*, E.C. Chan, Biodegradable drug-eluting
nanofibers enveloped implants providing sustained release of
high bactericidal concentrations of vancomycin and
ceftazidime: In vitro and in vivo study, International
Journal of Nanomedicine, 9, 4347-4355 (2014) (SCI) (指導作者) |
|
128) |
C.H. Lee, G.H. Jhong, M.Y.
Hsu, S.J. Liu*, C.J. Wang, K.C. Hung, Effect of
force-induced mechanical stress at the coronary artery
bifurcation stenting: Relation to in-stent restenosis,
Journal of Applied Physics, 115, 204904 (1-9) (2014) (SCI)
(指導作者) |
|
127) |
C.H. Lee, K.S. Liu, G.H. Jhong, S.J.
Liu*, M.Y. Hsu, C.J. Wang, K.C. Hung, Finite Element
Analysis of Helical Flows in Human
Aortic Arch: A Novel Index,
Biomicrofluidics, 8, 024111 (1-13) (2014) (SCI) (指導作者) |
|
126) |
C.H. Lee, M.J. Hsieh, S.H.
Chang, Y.H. Lin, S.J. Liu*, T.Y. Lin, K.C. Hung, J.H.S.
Pang, J.H. Juang, Enhancement of Diabetic Wound Repair Using
Biodegradable Nanofibrous Metformin-Eluting Membranes: in
Vitro and in Vivo, ACS Applied Materials and Interfaces, 6,
3979-3986 (2014) (SCI) (指導作者) |
|
125) |
C.H. Lee, S.H. Chang, Y.H.
Lin, S.J. Liu*, C.J. Wang, M.Y. Hsu, K.C. Hung, Y.H. Yeh,
W.J. Chen, I.C. Hsieh, M.S. Wen, Acceleration of
re-endothelialization and inhibition of neointimal formation
using hybrid biodegradable nanofibrous rosuvastatin-loaded
stents, Biomaterials, 35, 4417-4427 (2014) (SCI) (指導作者) |
|
124) |
J.J. Wu, H.W. Lee, J.H. You,
Y.C. Kau, S.J. Liu*, Adsorption of silver ions on
polypyrrole embedded electrospun nanofibrous
polyethersulfone membranes, Journal of Colloid and Interface
Science, 420, 145-151 (2014) (SCI) (指導作者) |
|
123) |
Y.Y Tseng, J.Y. Liao, W.A.
Chen, Y.C. Kao, S.J. Liu*, Biodegradable
poly[(d,l)-lactide-co-glycolide] nanofibers for the
sustainable delivery of lidocaine into the epidural space
after laminectomy, Nanomedicines, 9, 77-87 (2014)
(SCI) (指導作者) |
|
122) |
C.H. Lee, Y.H. Lin, S.H.
Chang, C.D. Tai, S.J. Liu*, Y. Chu, C.J. Wang, M.Y. Hsu,
H.Chang, G.J. Chang, K.C. Hung, M.J. Hsieh, F.C. Lin, I.C.
Hsien, M.S. Wen, Y. Huang, Local Sustained Delivery of
Acetylsalicylic Acid via Hybrid Stent/Biodegradable
Nanofibers Reduces Adhesion of Blood Cells and Promotes
Re-Endothelialization to the Denuded Artery, International
Journal of Nanomedicine, 9, 311-326 (2014) (SCI)
(指導作者) |
|
2013 |
|
121) |
Y.Y Tseng, Y.C. Kao, J.Y.
Liao, W.A. Chen, S.J. Liu*, Biodegradable drug-eluting
poly[(d,l)-lactide-co-glycolide] nanofibers for the
sustainable delivery of vancomycin to the brain tissue: In
vitro and in vivo studies, ACS Chemical Neuroscience, 4,
1314-1321 (2013) (SCI) (指導作者) |
|
120) |
C.H. Lee, C.L. Chiang, S.J.
Liu*, Electrospun nanofibrous
rhodanine/polymethylmethacrylate membranes for the removal
of heavy metal ions, Separation and Purification Process,
118, 737-743 (2013) (SCI) (指導作者) |
|
119) |
Y.K. Chao, K.S. Liu, Y.C.
Wang, Y.L. Huang, S.J. Liu*, Biodegradable cisplatin-eluting
Tracheal Stent for malignant airway obstruction: In vivo and
in vitro studies, Chest, 144, 193-199 (2013)(SCI) (指導作者) |
|
118) |
Y.Y Tseng, J.Y. Liao, W.A.
Chen, Y.C. Kao, S.J. Liu*, Sustainable Release of Carmustine
from Biodegradable Poly[(d,l)-lactide-co-glycolide]
Nanofibrous Membranes in the Cerebral Cavity: In vitro and
in vivo studies, Expert Opinion on Drug Delivery, 10,
879-888 (2013)(SCI) (指導作者) |
|
117) |
D. Lee, W.A. Chen, T.W.
Huang, S.J. Liu*, Factors influencing the warpage in in-mold
decoration (IMD) injection molded parts, International
Polymer Processing, 28, 221-227 (2013) (SCI) (指導作者)
NSC98-2221-E-182-003-MY3 |
|
116) |
K.Y. Lin, S.J. Liu*, Fast
Fabrication of Microfeatured Plastic Diffusers Using
IR-assisted Injection Molding, Materials and Manufacturing
Process, 28, 19-23 (2013) (SCI) (指導作者) |
|
115) |
Y.J. Peng, Y.T. Lu, K.S.
Liu, S.J. Liu*, L. Fan, W.C. Huang, Biodegradable
Balloon-expandable Self-locking Polycaprolactone Stents as
Buckling Explants for the Treatment of Retinal Detachment:
An in vitro and in vivo study, Journal of Biomedical
Materials Research Part A, 101A, 167-175 (2013) (SCI) (指導作者) |
|
114) |
D.W.C.
Chen, F.Y. Lee, J.Y. Liao, S.J. Liu*, C.Y. Hsiao, J.K. Chen,
Preclinical experiments on the release behavior of
biodegradable nanofibrous multi-pharmaceutical membranes in
the four-wall intrabony defect, Antimicrobial Agents and
Chemotherapy, 57, 9-14 (2013) (SCI) (指導作者) |
|
113) |
S.J. Liu, W.A. Chen,
Nanofeatured anti-reflective films manufactured using hot
roller imprinting and self-assembly nanosphere lithography,
Optics and Laser Technology, 48, 226-234 (2013) (SCI)
NSC100-2221-E-182-020-MY3 |
|
112) |
Y.C. Kau, D.W.C. Chen, Y.T.
Hsieh, F.Y. Lee, S.J. Liu*, Compression Molding of
Biodegradable Drugeluting Implants for Sustained Release of
Metronidazole and Doxycycline, Journal of Applied Polymer
Science, 127, 554-560 (2013) (SCI) (指導作者) |
|
2012 |
|
111) |
C.H. Lee, C.J. Chen, S.J.
Liu*, C.Y. Hsiao, J.K. Chen, The Development of Novel
Biodegradable Bifurcation Stents for the Sustainable Release
of Anti-Proliferative Sirolimus, Annals of Biomedical
Engineering, 40, 1961-1970 (2012) (SCI) (指導作者) |
|
110) |
S.J. Liu, C.C. Huang, C.T.
Liao, Continuous Infrared-assisted Double-sided Roll-to-roll
Embossing of Flexible Polymer Substrates, Polymer
Engineering and Science, 52, 1395-1401 (2012) (SCI) |
|
109) |
S.J. Liu, C.M. Hsu, P.W.
Chang, Parameters Affecting the Ink Wash-off in In-mold
Decoration of Injection Molded Parts, International Polymer
Processing, 27, 224-230 (2012) (SCI) |
|
108) |
D.W.C. Chen, Y.H. Hsu, J.Y.
Liao, S.J. Liu*, J.K. Chen, S.W.N. Ueng, Sustainable Release
of Vancomycin, Gentamicin and Lidocaine from Novel
Electrospun Sandwich-structured PLGA/collagen Nanofibrous
Membranes, International Journal of Pharmaceutics, 430,
335-341 (2012) (SCI) (指導作者) |
|
107) |
K.S. Liu, S.J. Liu*, H.Y.
Chen, Y.K. Huang, Y.J. Peng, R.C. Wu, S.W.N. Ueng, Steady
Antibiotic Release from Biodegradable Beads in the Pleural
Cavity: An In Vitro and In Vivo Study, Chest, 141, 1197-1202
(2012) (SCI) (指導作者) |
|
106) |
C.Y. Hsaio, S.J. Liu*,
S.W.N. Ueng, E.C. Chan, The influence of gamma irradiation
and ethylene oxide treatment on the release characteristics
of biodegradable poly(lactide-co-glycolide) composites,
Polymer Degradation and Stability, 97, 715-720 (2012) (SCI)
(指導作者) |
|
105) |
D.W.C. Chen, J.Y. Liao, S.J.
Liu*, E.C Chan, Novel biodegradable sandwich-structured
nanofibrous drug-eluting membranes for repair of infected
wounds: an in vitro and in vivo study, International Journal
of Nanomedicine, 7, 763-771 (2012) (SCI) (指導作者) |
|
104) |
S.J. Liu, C.T. Liao, Fast
fabrication of nanostructured anti-reflection layers for
enhancement of solar cells performance using plasma
sputtering and infrared assisted roller embossing
techniques, Optics Express, 20, 5143-5150 (2012) (SCI) ---
NSC100-2221-E-182-020-MY3 |
|
2011 |
|
103) |
S.J. Liu, W.R. Lin, K.Y.
Lin, Morphological Development in Water Assisted Injection
Molded Polyethylene/Polyamide-6 Blends, Polymers for
Advanced Technology, 22, 2062-2068 (2011) (SCI) ---
NSC95-2221-E-182-032-MY3 |
|
102) |
F.Y. Lee, D.W. Chen, C.C.
Hu, Y.T. Hsieh, S.J. Liu*, E.C. Chan, In-vitro and in-vivo
investigation of drug-eluting implants for the treatment of
periodontal disease, AAPS PharmSciTech, 12, 1110-1115 (2011)
(SCI) (指導作者) |
|
101) |
S.J. Liu, L.Y. Chiou, J.Y.
Liao, Ultra-low Dielectric Property of Electrospun
Polylactide-polyglycolide Nanofibrous Membranes, Japanese
Journal of Applied Physics, 50, 10PG05 (2011) (SCI) |
|
100) |
S.J. Liu, K.M. Peng, C.Y.
Hsiao, K.S. Liu, H.T. Chung, J.K. Chan, Novel Biodegradable
Polycaprolactone Occlusion Device Combining Nanofibrous
PLGA/Collagen Membrane for Closure of Atrial Septal Defect
(ASD), Annals of Biomedical Engineering, 39, 2759-2766
(2011) (SCI) |
|
99) |
S.W.N. Ueng, L.J. Yuan, S.S.
Lin, S.J. Liu, E.C. Chan, K.T. Chen, M.S. Lee, In vitro and
in vivo analysis of a biodegradable
poly(lactide-co-glycolide) copolymer capsule and collagen
composite system for antibiotics and bone cells delivery.
Journal of Trauma, Injury, Infection and Critical Care, 70,
1503-1509 (2011) (SCI) |
|
98) |
J.W. Huang, S.S. Lin, L.H.
Chen, S.J. Liu, C.C. Niu, L.J. Yuan, C.C. Wu, W.J. Chen, The
use of fluorescence labeled mesenchymal stem cells in
poly(lactide-co-glycolide)/hydorxyapatite/collagen hybrid
graft as a bone substitute for posterolateral spinal fusion,
Journal of Trauma, Injury, Infection and Critical Care, 70,
1495-1502 (2011) (SCI) |
|
97) |
S.J. Liu, C.W. Ho,
Experimental and Numerical Analysis of the Temperature
Distribution of Injection Molded Products Using Protruding
Microprobes, Reviews in Scientific Instruments, 82, 055109
(2011) (SCI) |
|
96) |
S.J. Liu, C.Y. Hsiao, J.K.
Chen, K.S. Liu, C.H. Lee, In-vitro Release of
Anti-Proliferative Paclitaxel from Novel Balloon-expandable
Polycaprolactone Stents, Materials Science and Engineering
C: Materials for Biological Applications, 31, 1129-1135
(2011) (SCI) |
|
95) |
K.S. Liu, Y.H. Liu, Y.J.
Peng, S.J. Liu, Experimental Absorbable Stent Permits Airway
Remodeling, Journal of Thoracic and Cardiovascular Surgery,
141, 463-468 (2011) (SCI) (指導作者) |
|
2010 |
|
94) |
S.J. Liu, F.J. Chiang, C.Y.
Hsiao, Y.C. Kau, K.S. Liu. Fabrication of Balloon-expandable
Self-lock Drug-eluting Polycaprolactone Stents Using
Micro-injection Molding and Spray Coating Techniques. Annals
of Biomedical Engineering, 38, 3185-3194 (2010) (SCI) |
|
93) |
Y.J. Peng, Y.C. Kau, C.W.
Wen, K.S. Liu and S.J. Liu*, Solvent-Free Biodegradable
Scleral Plugs Providing Sustained Release of Vancomycin,
Amikacin and Dexamethasone – An In Vivo Study, Journal of
Biomedical Materials Research Part A, 94A, 426–432 (2010)
(SCI) (指導作者) |
|
92) |
S.J. Liu, K.M. Peng,
Rotational Molding of Polycarbonate Reinforced Polyethylene
Composites: Processing parameters and properties, Polymer
Engineering and Science, 50, 1457-1465 (2010) (SCI)---
NSC95-2221-E-182-032-MY3 |
|
91) |
S.J. Liu, H.F. Cheng, The
Influence of Interface Geometry on the Joint Strengths of
Hot Plate Welded Composites, Journal of Reinforced Plastics
and Composites, 29, 497-509 (2010) (SCI)---
NSC95-2221-E-182-032-MY3 |
|
90) |
S.J. Liu, Y.C. Huang, S.Y.
Yang, K.H. Hsieh, Rapid Fabrication of Surface-relief
Plastic Diffusers by Ultrasonic Embossing, Optics and Laser
Technology, 42, 794-798 (2010) (SCI)---
NSC96-2221-E-182-032-MY3 |
|
89) |
S.J. Liu, Y.C. Kau, C.Y.
Chou, J.K. Chen, R.C. Wu, W.L. Yeh. Electrospun
PLGA/collagen nanofibrous membrane as early-stage wound
dressing. Journal of Membrane Science, 355, 53-59 (2010)
(SCI) |
|
88) |
K.Y. Lin, S.J. Liu*,
Morphology of Fluid Assisted Injection Molded
Polycarbonate/Polyethylene Blends, Macromolecular Materials
and Engineering, 295, 342-350 (2010) (SCI)---
NSC95-2221-E-182-032-MY3 (指導作者) |
|
87) |
Y.J. Peng, C.W. Wen, S.H.
Chiou, S.J. Liu*, Sustained Release of Ganciclovir and
Foscarnet from Biodegradable Scleral Plugs for the Treatment
of Cytomegalovirus Retinitis, Biomaterials, 31, 1773-1779
(2010) (SCI) (指導作者) |
2009
|
86) |
S.J. Liu, Y.C.
Huang, Manufacture
of dual-side surface-relief diffusers with various
cross angles using ultrasonic embossing technique,
Optics Express, 17, 18083-18092 (2009) (SCI) |
|
85) |
K.Y. Lin, S.J. Liu*,
The Influence of Processing Parameters on Fingering
Formation in Fluid Assisted Injection Molded Disks,
Polymer Engineering and Science, 49, 2257-2263
(2009) (SCI) --- NSC95-2221-E-182-032-MY3 (指導作者) |
|
84) |
S.J. Liu, P.C. Su,
Novel Three-Dimensional In-Cavity Transient
Temperature Measurements in Injection Molding and
Fluid Assisted Injection Molding, Polymer Testing,
28, 66-74 (2009) (SCI) --- NSC95-2221-E-182-032-MY3 |
|
83) |
S.J. Liu, Y.C. Kau,
C.W. Liaw, Y.J. Peng, In-Vitro Elution of Vancomycin
/Amikacin/Steroid from Solvent-free Biodegradable
Scleral Plugs, International Journal of
Pharmaceutics, 370, 75-80 (2009) (SCI) |
|
82) |
T.S. Fu, W.J. Ceh,
L.H. Chen, S.S. Lin, S.J. Liu, S.W.N. Ueng,
Enhancement of Posterolateral Lumbar Spine Fusion
Using Low-Dose rhBMP-2 and Cultured Marrow Stromal
Cells , Journal of Orthopaedic Research, 27, 380-384
(2009) (SCI) |
|
81) |
S.J. Liu, C.L.
Hsueh, S.W.N. Ueng, S.S. Lin, J.K. Chen, Manufacture
of Solvent-free Poly-lactic-glycolic Acid (PLGA)
Scaffolds for Tissue Engineering, Asia Pacific
Journal of Chemical Engineering, 4, 154-160 (2009)
(SCI) |
|
80) |
S.J. Liu, P.C. Su,
K.Y. Lin, In-situ Temperature Measurements in the
Depths of Injection Molded Parts, Measurement, 42,
771-777 (2009) (SCI) --- NSC95-2221-E-182-032-MY3 |
|
79) |
K.Y. Lin, F.A.
Chang, S.J. Liu*, Using Differential Mold
Temperatures to Improve the Residual Wall Thickness
Uniformity around Curved Sections of Fluid Assisted
Injection Molded Tubes, International Communication
in Heat and Mass Transfer, 36, 491-497 (2009) (SCI)
-- NSC96-2628-E-182-001-MY3 (指導作者) |
|
78) |
S.J. Liu, P.C. Su,
An Experimental Setup to Measure the Transient
Temperature Profiles in Water Assisted Injection
Molding, International Polymer Processing, 14,
234-241 (2009) (SCI) --- NSC95-2221-E-182-032-MY3 |
|
77) |
S.J. Liu, Water
Asssited Injection Molding: A Review, International
Polymer Processing, 14, 315-325 (2009) (SCI) ---
NSC95-2221-E-182-032-MY3 |
|
|
|
76) |
S.J. Liu, and K.H.
Fu, Experimental Investigation and Numerical
Simulation of the Heating/Cooling Process in
Rotational Molding Enhanced with Fins, Journal of
Applied Polymer Science, 108, 1696-1705 (2008) (SCI)
--- NSC95-2221-E-182-032-MY3 |
|
75) |
S.J. Liu, K.Y. Lin
and S.K. Tsai, Improving Weldline Strengths of
Injection Molded Parts by Ultrasonic Oscillation,
Plastic, Rubber and Composites: Macromolecular
Engineering, 37, 23-28 (2008) (SCI) ---
NSC96-2628-E-182-001-MY3 |
|
74) |
S.J. Liu and K.H.
Fu, Effect of the Enhancing Fins on the
Heating/Cooling Efficiency of Rotational Molding and
the Molded Product Qualities, Polymer Testing, 27,
209-220 (2008) (SCI) --- NSC95-2221-E-182-032-MY3 |
|
73) |
S.J. Liu, and C.C.
Shih, Water Assisted Injection Molding of Glass
Fiber Reinforced Nylon-6 Composites, Journal of
Reinforced Plastics and Composites, 27, 985-999
(2008)(SCI) --- NSC95-2221-E-182-032-MY3 |
|
72) |
S.J. Liu, K.Y. Lin,
and M.K. Li, Rapid Fabrication of Microstructures
onto Plastic Substrates by Infrared Hot Embossing,
International Polymer Processing, 23, 323-330
(2008)(SCI) --- NSC96-2628-E-182-001-MY3 |
|
71) |
S.J. Liu, K.Y. Lin,
C.C. Liu, Manufacture of Thermoplastic Elastomer
Tubes by Water Assisted Injection Molding
Technology, Rubber Chemistry and Technology, 81,
156-167 (2008) (SCI) --- NSC96-2628-E-182-001-MY3 |
|
70) |
S.J.
Liu, and C.H.
Lin, An Experimental
Study of Water-Assisted Injection Molding of Plastic
Tubes with Dimensional Transitions,
Journal of Reinforced Plastics
and Composites, 26, 1441-1454 (2007) (SCI) ---
NSC95-2221-E-182-032-MY3 |
|
69) |
S.W.N.
Ueng, M.S. Lee, S.S. Lin, E.C. Chang, S.J. Liu,
Development of a Biodegradable Alginate Carrier
System for Antibiotics and Bone Cells, Journal of
Orthopaedic Research, 25, 62-72 (2007) (SCI) |
|
68) |
S.J. Liu, and Y.C. Chang,
A
Novel Soft-mold Roller Embossing Method for the
Rapid Fabrication of Micro-blocks onto Glass
Substrates, Journal of Micromechanics and
Microengineering, 17, 172-179 (2007) (SCI)
---
NSC95-2221-E-182-032-MY3 |
|
67) |
S.J. Liu, P.S. Chi, S.S. Lin, S.W.N. Ueng, E.C.
Chan, J.K. Chen, Novel Solvent-free Fabrication of
Biodegradable Poly-lactic-glycolic Acid (PLGA)
Capsules for Antibiotics and rhBMP-2 Delivery,
International Journal of Pharmaceutics, 330, 45-53
(2007) (SCI) |
|
66) |
S.J. Liu and
Y.C. Wu, Dynamic Visualization of Cavity Filling
Process in Fluid-assisted Injection Molding - Gas
vs. Water, Polymer
Testing, 26, 232-242 (2007) (SCI)
---
NSC 94-2216-E182-005 |
|
65) |
S.J. Liu, M.H. Hsieh, Residual
Wall Thickness Distribution at the Transition and
Curve Sections of Water-Assisted Injection Molded
Tubes, International Polymer Processing, 22,
82-89 (2007) (SCI)
--- NSC 94-2216-E182-005 |
|
64) |
S.J. Liu, M.J. Lin, Y.C. Wu, An
Experimental Study of the Water-Assisted Injection
Molding of Glass Fiber Filled Polybutylene
Terephthalate (PBT) Composites, Composite Science
and Technology, 67, 1415-1424 (2007) (SCI)
--- NSC 94-2216-E182-005 |
|
63) |
S.J. Liu, Y.C. Wu, W.K. Chen, Surface Gloss
Difference on Water Assisted Injection Molded
Thermoplastic Parts: Effects of Processing
Variables, Plastic, Rubber and Composites:
Macromolecular Engineering, 35, 29-36 (2006) (SCI)
--- NSC 93-2216-E182-004 |
|
62) |
S.J. Liu, S.P. Lin, Parameters
Affecting the Formation of Fingerings in
Water-Assisted Injection Molded Thermoplastics,
Advances in Polymer Technology, 25, 98-108 (2006)
(SCI) --- NSC 93-2216-E182-004 |
|
61) |
S.J.
Liu,
Y.C. Wu,
A Novel High Flow-rate Pin for Water-Assisted
Injection Molding of Plastic Parts with a More
Uniform Residual Wall Thickness Distribution,
International Polymer Processing, 21, 436-439
(2006)
(SCI) --- NSC95-2221-E-182-032-MY3 |
|
60) |
Y.C.
Wu, K.M. Chen, S.J. Liu*,
Core-out Geometries in Water Channels of
Water-Assisted Injection Molded Parts, Plastic,
Rubber and Composites: Macromolecular Engineering,
35, 425-431(2006)
(SCI) --- NSC95-2221-E-182-032-MY3 (指導作者) |
 |
| |
|
59) |
S.J. Liu, Y.E. Tsai,
S.W.N. Ueng, E.C. Chan, A Novel Solvent-Free Method for
the Manufacture of Biodegradable Antibiotic-Capsules for
a Long-term Drug Release Using Compression Sintering and
Ultrasonic Welding Techniques, Biomaterials, 26,
4662-4669 (2005) (SCI) --- NSC 93-2216-E-182-004
|
|
58) |
S.J. Liu, and K.Y. Lin,
Injection Compression Molding of Wedge-shaped Plates:
Effects of Processing Parameters, Journal of Reinforced
Plastics and Composites, 24, 373-384(2005) (SCI) |
|
57) |
Y.Z. Chang, T.T. Wen, and
S.J. Liu, Derivation of Optimal Processing Parameters of
Polypropylene Foam Thermoforming by an Artificial Neural
Network, Polymer Engineering and Science, 45, 375-384(2005)
(SCI) |
|
56) |
S.J. Liu, Y.T. Dung, Hot
Embossing Microstructures onto Plastic Plates by Ultrasonic
Vibration, Polymer Engineering and Science, 45,
915-925(2005) (SCI) |
|
55) |
S.J. Liu, S.P. Lin, Study
of “Fingering” in Water Assisted Injection Molded
Composites, Composite Part A: Applied Science and
Manufacturing, 36, 1507-1517(2005) (SCI) ---
NSC93-2216-E-182-004 |
|
54) |
Y.C. Wu, S.J. Liu*, Flow
Visualization of Water Assisted Injection Molding Process,
Plastic, Rubber and Composites: Macromolecular Engineering,
34, 227-231 (2005) (SCI) (指導作者) |
|
53) |
S.J. Liu, Y.C. Wu, P.C.
Lai, Water Penetration Stability in Water Assisted Injection
Molded Symmetric Ribs, International Polymer Processing, 20,
352-359 (2005) (SCI) |
|
52) |
S.J. Liu, Y.T. Dung,
Ultrasonic Vibration Hot Embossing – A novel technique for
molding plastic microstructure, International Polymer
Processing, 20, 449-452 (2005) (SCI) |
|
 |
|
51) |
G.M. Wu, C.H. Hung, J.H.
You and S.J. Liu, Surface Modification of Reinforcement
Fibers for Composites by Acid Treatments, Journal of Polymer
Research, 11, 31-36(2004) (SCI) |
|
50) |
S.J. Liu, and C.Y. Yang,
Application of Statistic Estimation to Weldline Strengths of
Injection Molded Thermoplastic Composites, Journal of
Reinforced Plastics and Composites, 23, 1383-1396(2004)
(SCI) |
|
49) |
S.J. Liu, and W.K. Chen,
Experimental Investigation and Numerical Simulation of the
Cooling Process in Water Assisted Injection Molded Parts,
Plastic, Rubber and Composites: Macromolecular Engineering,
33, 260-266(2004) (SCI) --- NSC 92-2216-E182-004 |
|
48) |
S.J. Liu and Y.S. Chen,
The Manufacturing of Thermoplastic Composites by Water
Assisted Injection Molding Technology, Composite Part A:
Applied Science and Manufacturing, 35, 171-180(2004)(SCI)
--- NSC 91-2216-E182-006 |
|
47) |
G. Wang, S.J. Liu, S.W.N.
Ueng, and E.C. Chan, The Release of Cefazolin and Gentamicin
from Biodegradable PLA/PGA Beads, International Journal of
Pharmaceutics, 273, 203-212(2004)(SCI) |
 |
|
46) |
S.J. Liu, and K.H. Chang,
Parameters Affecting the Full-shot Molding of Gas Assisted
Injection Molded Parts, Advances in Polymer Technology, 22,
1 (2003)(SCI) |
|
45) |
C.H. Chen, W.J. Chen,
C.H. Shih, S.J. Liu and P.Y. Lin, Enveloping the Tendon
Graft with Periosteum to Enhance Tendon-Bone Healing in a
Bone Tunnel- A Biomechanical and Histological Study in
Rabbits, Arthroscopy-The Journal of Arthroscopic and Related
Surgery, 18, 290-296(2003) (SCI) |
|
44) |
S.J. Liu, and C.Y. Chang,
The Influence of Processing Parameters on Thin- wall Gas
Assisted Injection Molding of Thermoplastic Materials,
Journal of Reinforced Plastics and Composites, 22, 711(2003)
(SCI) |
|
43) |
S.J. Liu, and Y.S. Chen,
Water Assisted Injection Molding of Thermoplastic Materials:
Effects of Processing Parameters, Polymer Engineering and
Science, 43, 1806(2003)(SCI) --- NSC 91-2216-E182-006
|
|
42) |
S.L. Hwang, S.J. Liu,
W.L. Chen, C.L. Wang, S.W. Chou, Experimental Development of
Processing Technology for Yuba-like Films Using Twin-Screw
Extrusion, International Polymer Processing, 18,
343-348(2003)(SCI) |
 |
|
41) |
S.J. Liu and I.T. Chang,,
Surface Roughness at the Transition Sites of Gas Assist
Injection Molded Nylon Composites, Journal of Reinforced
Plastics and Composites, 21, 217(2002)(SCI) |
|
40) |
S.J. Liu and I.T. Chang,
Optimizing the Weld Strength of Ultrasonically Welded Nylon
Composites, Journal of Composite Materials, 36,
611(2002)(SCI) |
|
39) |
S.J. Liu, and C.Y. Yang,
An Experimental Study of the Weldline Caused by the
Flow-lead Effect in Gas Assisted Injection Molded Parts,
Plastics Rubber and Composites, 31, 36(2002)(SCI) |
|
38) |
S.J. Liu, and I.H. Lin,
Glossy Difference on the Surface of Gas Assisted Injection
Molded Parts, Plastics Rubber and Composites, 31,
28(2002)(SCI) |
|
37) |
S.J. Liu, and I.H. Lin,
An Empirical Study of the Surface Blush in Gas-Assisted
Injection Molded Parts, International Polymer Processing,
17, 60(2002)(SCI) |
|
36) |
S.J. Liu and C.F. Chen,
Significance of Processing Parameters on the Warpage of
Rotationally Molded Parts, Journal of Reinforced Plastics
and Composites, 21, 723(2002)(SCI) |
|
35) |
S.J. Liu, C.H. Hsu and
C.Y. Chang, Parametric Characterization of the Thin-Wall
Injection Molding of Thermoplastic Composites, Journal of
Reinforced Plastics and Composites, 21, 1027(2002)(SCI) |
|
34) |
S.W.N. Ueng, L.J. Yuan,
N. Lee, S.S. Lin, S.J. Liu et al., In Vivo Study of Hot
Compression Molded 50:50 Poly(DL-lactide-co-glycolide)
Antibiotic Beads in Rabbits, Journal of Orthopedic Research,
20, 654(2002)(SCI) |
|
33) |
S.J. Liu and K.H. Chang,
An Empirical Study of Gas Penetration in Full-shot
Gas-assisted Injection Molded Parts, Proceeding Institute of
Mechanical Engineering Part B: Journal of Engineering
Manufacturing, 216, 1549(2002)(SCI) |
|
32) |
S.J. Liu, S.W.N. Ueng,
S.S. Lin, E.C. Chan, In Vivo Release of Antibiotics from
Biodegradable Beads., Journal of Biomedical Materials
Research(Applied Biomaterials), 63, 807(2002)(SCI) |
 |
|
31) |
S.J. Liu, C.H. Lin and
Y.C. Wu, Minimizing the Sinkmark in Injection Molded
Thermoplastics, Advances in Polymer Technology, 20,
202(2001)(SCI) |
|
30) |
S.J. Liu, Effects of
Processing Parameters on Formation of Sinkmark on Injection
Molded Parts, Plastics Rubber and Composites, 30, 170(2001)
(SCI) |
|
29) |
S.J. Liu and C.H. Yang,
Rotational Molding of Two-Layered Polyethylene Foams,
Advances in Polymer Technology, 20, 108(2001) (SCI)--- NSC
88-2216-E182-005 |
|
28) |
S.J. Liu and C.Y. Yang,
Optimizing the Weldline Strength of Injection Molded Liquid
Crystal Polymers, Journal of Polymer Engineering, 21,
53(2001) (SCI) |
|
27) |
S.J. Liu and I.T. Chang,
Factors Affecting the Joint Strength of Ultrasoncially
Welded Polypropylene Composites, Polymer Composites, 22,
132(2001) (SCI) |
 |
|
26) |
S.J. Liu and C.F. Chen,
Optimization of the Bubble Size of Rotationally Molded
Parts, Plastic, Rubber and Composites, 29, 411(2000)(SCI)
--- NSC 88-2216-E182-005 |
|
25) |
S.J. Liu and J.H. Chang,
Application of the Taguchi Method to Optimize the Surface
Quality of Gas Assist Injection Molded Composites, Journal
of Reinforced Plastics and Composites, 19, 1352(2000)
(SCI)--- NSC 89-2216-E182-005 |
|
24) |
S.J. Liu and C.H. Yang,
Rotational Molding of Expanded Polyethylene by Pellet,
Cellular Polymer, 19, 257(2000) (SCI)--- NSC
87-2216-E182-005 |
|
23) |
S.J. Liu and Y.C. Wu,
Factors Affecting the Stability of Gas Penetration in Gas
Assist Injection Molded Bifurcation Parts, International
Polymer Processing, 15, 297(2000) (SCI) |
|
22) |
S.J. Liu and C.Y. Ho, A
Study of Warpage in Rotationally Molded Parts, Journal of
Reinforced Plastics and Composites, 19, 992(2000)(SCI) ---
NSC 87-2216-E182-005 |
|
21) |
S.J. Liu, J.Y.Wu, J.H.
Chang and S.W. Hung, An Experimental Matrix Design to
Optimize the Weldline Strength of Injection Molded Parts,
Polymer Engineering and Science, 40, 1256(2000) (SCI) |
|
20) |
S.J. Liu and J.H. Chang,
The Occurrence of Surface Roughness in Gas Assist Injection
Molded Nylon Composites, Polymer Composites, 21,
322(2000)(SCI) --- NSC 89-2216-E182-005 |
|
19) |
Y.K. Chuah, L.H. Chien,
B.C. Chang and S.J. Liu, Effects of the Shape of the Energy
Director on Far-Field Ultrasonic Welding of Thermoplastics,
Polymer Engineering and Science, 40, 157(2000) (SCI) |
|
18) |
S.J. Liu, C.C. Lai and
S.T. Lin, Optimizing the Impact Strength of Rotationally
Molded Parts, Polymer Engineering and Science, 40,
473(2000)(SCI)---NSC 87-2216-E182-005 |
 |
|
17) |
S.J. Liu, C.H. Tsai,
S.W.N. Ueng and S.S. Lin, Processing of Biodegradable
Composites for a Durg Delivery System in Vitro,
International Polymer Processing, 14, 322(1999) (SCI) |
|
16) |
S.W.N. Ueng, S.S. Lin,
C.R. Wang, S.J. Liu, et al., Hyperbaric Oxygen Therapy
Migrates the Adverse Effect of Cigarette Smoking on the Bone
Healing of Tibial Lengthening: An Experimental Study on
Rabbits, Journal of Trauma, 47, 752(1999)
(SCI) |
|
15) |
S.J. Liu and C. H. Tsai,
An Experimental Study of Foamed Polyethylene in Rotational
Molding, Polymer Engineering and Science, 39,
1776(1999)(SCI)---NSC 86-2216-E182-002 |
|
14) |
S.J. Liu and C.Y. Ho,
Factors Affecting the Warpage of Rotationally Molded Parts,
Advances in Polymer Technology, 18, 201(1999)(SCI) --- NSC
86-2216-E182-002 |
|
13) |
S.S. Lin, S.W.N. Ueng,
S.J. Liu, et al., Research and Development of A
Biodegradable Antibiotic Delivery System, Clinical
Orthopedic, 362, 240(1999) (SCI) |
|
12) |
S.J. Liu, W.F. Lin and
B.C. Chang, G. Wu and S.W. Hung, Optimizing the Joint
Strength in Ultrasonically Welded Thermoplastics, Advances
in Polymer Technology, 18, 125(1999)(SCI) ---NSC
86-2214-E182-002 |
|
11) |
S.J. Liu, Computer
Simulation of the Inflation Process in Blow Molding, Journal
of Reinforced Plastics and Composites, 18, 759(1999)(SCI) |
|
10) |
S.J. Liu, J.H. Chang,
C.Y. Ho and S.W. Hung, Optimization of the Weldline Strength
in Gas-Assist Injection Molded Thermoplastics, International
Polymer Processing, 14, 191(1999) (SCI) |
|
9) |
S.J. Liu, Process
Optimization of Thermoforming PP/CaCO3 Composites,
International Polymer Processing, 14, 98(1999) (SCI) |
|
8) |
S.W.N. Ueng, S.S. Lin,
C.R. Wang, S.J. Liu, et al., “Bone Healing of Tibial
Lengthening is Delayed by Cigarette Smoking: Study of Bone
Mineral Density and Torsinal Strength on Rabbits”, Journal
of Trauma, 46, 110(1999) (SCI) |
|
7) |
S.J. Liu, S.W.N. Ueng,
E.C. Chan, et. al., In Vitro Elution of Antibiotics from
Biodegradable Beads., Journal of Biomedical Materials
Research(Applied Biomaterials), 48, 613(1999) (SCI) |
 |
|
6) |
S.J. Liu, Sintering
Rheology of Semi-crystalline Polymers, International Polymer
Processing, 13, 88(1998)(SCI) ---NSC 86-2216-E182-002
|
|
5) |
S.J. Liu, P.J. Chang,
L.H. Chien and Y.H. Tsai, Development of Weldability Diagram
for Ultrasonically Welded Thermoplastics., Rubber, Plastic
and Composite, 27, 279(1998) (SCI)---NSC 86-2216-E182-002
|
|
4) |
S.W.N. Ueng, S.S. Lee,
S.S. Lin, C.R. Wang, S.J. Liu, et al., Bone Healing of
Tibial Lengthening Is Enhanced by Hyperbaric Oxygen Therapy:
A Study of Bone Mineral Density and Torsional Strength on
Rabbits., Journal of Trauma, 44, 676(1998) (SCI) |
 |
|
3) |
S.J. Liu, Modeling and
Simulation of Vacuum Forming of Wood Fiber Filled
Thermoplastic Composites, Polymer Composites, 18, 673(1997)
(SCI) |
|
2) |
S.J. Liu, A New
Viscoelastic Phase Transformation Model to Simulate the
Injection Molding Residual Stress, Journal of Applied
Polymer Science, 62, 1537(1996) (SCI) |
|
1) |
S.J. Liu, Modeling and
Simulation of Thermally Induced Stresses and Warpages in
Injection Molded Thermoplastics, Polymer Engineering and
Science, 36, 807(1996) (SCI) |
| |
 |
|
 |
|
|
